intelliswab rapid test instructions

InteliSwab Rapid Test Instructions

The InteliSwab COVID-19 Rapid Test is a simple and convenient way to detect the presence of SARS-CoV-2 nucleocapsid protein antigen. This manual‚ visually read immunoassay allows for results in minutes. To ensure accurate results‚ follow the test directions carefully.

For any questions or concerns‚ contact OraSure Technologies at 1-833-601-0127 or visit www.InteliSwab.com.

Introduction

The InteliSwab COVID-19 Rapid Test is a user-friendly‚ self-administered test designed for the qualitative detection of SARS-CoV-2 nucleocapsid protein antigen in individuals suspected of COVID-19. This test is intended for use by individuals at home or in other non-laboratory settings. The InteliSwab test provides rapid results‚ typically within minutes‚ allowing for timely decision-making regarding isolation and further medical evaluation.

This test is a valuable tool for individuals seeking to monitor their own health and make informed decisions about their potential risk of COVID-19 transmission. It can also be used for routine screening in workplaces‚ schools‚ and other settings where rapid testing is desired. However‚ it is crucial to understand that the InteliSwab test‚ like any rapid antigen test‚ may not detect all cases of COVID-19. It is essential to consider the test results in conjunction with other factors such as clinical symptoms and potential exposure history.

This document provides detailed instructions for using the InteliSwab COVID-19 Rapid Test. Please read these instructions carefully before performing the test to ensure accurate results and maximize the effectiveness of this self-administered tool.

Test Components

The InteliSwab COVID-19 Rapid Test kit includes the following components‚ carefully packaged for user convenience and accuracy⁚

• Individual Test Cassette⁚ This cassette contains the essential reagents for the antigen detection process. It features a sample well for adding the swab solution‚ a control line (C)‚ and a test line (T) for visual result interpretation.
• Sterile Nasal Swab⁚ This flocked swab is designed for comfortable and efficient sample collection from the nasal cavity. Its unique material and design enable optimal sample acquisition.
• Extraction Solution Vial⁚ This vial contains a buffer solution that helps extract the SARS-CoV-2 antigen from the nasal swab sample.
• Instructions for Use⁚ This document provides a step-by-step guide for performing the InteliSwab test‚ ensuring a clear understanding of the procedure and proper interpretation of results. It also includes important safety information and contact details for any further assistance.

Each component plays a critical role in ensuring the accuracy and reliability of the InteliSwab test. Proper handling and use of these components are essential for obtaining valid results.

Preparation

Before beginning the InteliSwab test‚ it is crucial to ensure a clean and organized environment to minimize the risk of contamination and obtain accurate results. The following steps are essential for proper preparation⁚

1. Gather All Test Components⁚ Ensure that you have all the necessary components for the InteliSwab test‚ including the individual test cassette‚ sterile nasal swab‚ extraction solution vial‚ and instructions for use.
2. Wash Hands Thoroughly⁚ Before handling any test components‚ wash your hands thoroughly with soap and water for at least 20 seconds. This helps prevent contamination of the test sample and ensures accurate results.
3. Find a Well-Lit Area⁚ Choose a clean‚ well-lit area for performing the test. This will enable you to clearly observe the control and test lines on the cassette for accurate result interpretation.
4. Read Instructions Carefully⁚ Before proceeding‚ carefully read the instructions for use included in the test kit. This will ensure you understand the steps involved‚ the timing requirements‚ and the proper handling procedures.

By following these preparation steps‚ you set the stage for a successful and accurate InteliSwab test‚ ensuring the most reliable results possible.

Swabbing Procedure

The swabbing procedure is a crucial step in the InteliSwab test‚ as it involves collecting the sample for analysis. To ensure accurate results‚ it is essential to follow these instructions carefully⁚

1. Open the Individual Test Cassette⁚ Gently open the individual test cassette‚ exposing the swab and the extraction solution vial; Avoid touching the swab head to prevent contamination.
2. Insert the Swab⁚ Tilt your head back and insert the swab straight back (not up) into one nostril. Stop when you meet resistance or when you reach 2.5 cm. (For children under 12 years old‚ the depth may be shorter.)
3. Swab the Nostril⁚ Turn the swab against the inside of your nose 5-10 times. This helps collect a sufficient sample for accurate detection.
4. Repeat for Other Nostril⁚ Remove the swab and repeat the same steps in the other nostril.
5. Swabbing Time⁚ Ensure that the swab remains in the nostril for the duration specified in the instructions‚ typically 15 seconds. This allows for adequate sample collection.

By performing the swabbing procedure correctly‚ you ensure that the sample is collected appropriately‚ leading to accurate and reliable results.

Swabbing the Nostrils

The InteliSwab test requires sampling from both nostrils to ensure a comprehensive sample collection. This is essential for accurate detection of SARS-CoV-2 antigen. Here’s how to swab your nostrils correctly⁚

1. Tilt Your Head Back⁚ Gently tilt your head back to allow for easier access to your nostrils.
2. Insert the Swab⁚ Insert the swab straight back (not up) into one nostril. Stop when you meet resistance or when you reach 2.5 cm. For children under 12 years old‚ the depth may be shorter.
3. Swab the Inside⁚ Turn the swab against the inside wall of your nostril‚ making a circular motion 5-10 times. This helps collect a sufficient sample from the nasal passages.
4. Repeat for Other Nostril⁚ Remove the swab from the first nostril and repeat the same procedure for the other nostril.
5. Maintain Contact⁚ Ensure that the swab remains in contact with the inside wall of the nostril throughout the swabbing process.

Remember to follow the instructions provided in the test kit for specific details and any age-related adjustments. By following these steps‚ you can ensure accurate and reliable results from your InteliSwab test.

Swabbing Time

The swabbing process is crucial for collecting a sufficient sample for an accurate result. It’s important to allocate enough time to properly swab each nostril. The recommended swabbing duration varies depending on the individual’s nasal passages and age.

For adults‚ the swab should be rotated against the inside wall of the nostril for 5-10 seconds. This ensures adequate contact with the nasal lining and allows for the collection of a representative sample.

For children under 12 years old‚ the recommended swabbing time may be shorter. Refer to the specific instructions provided with the InteliSwab test kit for age-appropriate recommendations.

Remember‚ it’s essential to follow the instructions provided in the kit carefully. Proper swabbing technique and sufficient swabbing time are crucial for obtaining accurate results. If you have any doubts‚ consult the instructions or reach out to OraSure Technologies for assistance.

Adding Solution

After carefully swabbing both nostrils‚ it’s time to add the solution provided in the InteliSwab test kit. This step is crucial for dissolving any potential viral particles collected on the swab and enabling the detection process.

Locate the Developer Vial‚ which contains the solution‚ and ensure the swab is properly inserted into the vial. Carefully break the swab at the indicated point‚ ensuring the swab tip remains submerged in the solution.

Once the swab is broken‚ gently swirl the vial for at least 10 seconds to ensure the solution thoroughly mixes with the swab and any collected sample. Avoid shaking the vial vigorously as this can lead to inaccurate results.

The solution acts as a reagent‚ facilitating the detection of SARS-CoV-2 antigens. Proper mixing is vital for allowing the solution to interact with the sample and produce a visible result.

Following the instructions provided in the InteliSwab test kit carefully will ensure the solution is added correctly‚ enabling a reliable and accurate test result.

Reading Results

After the recommended waiting time‚ which is typically indicated on the InteliSwab test kit‚ you can proceed to read the results. The results window will display two lines⁚ the Control line (C) and the Test line (T). These lines are crucial for interpreting the test result.

A positive result indicates the presence of SARS-CoV-2 antigens‚ suggesting a current infection. This is indicated by the appearance of both the Control line (C) and the Test line (T). Even a faint visible colored Test line (T) with the Control line (C) is considered a positive result.

A negative result means no SARS-CoV-2 antigens were detected‚ suggesting no current infection. This is indicated by the appearance of only the Control line (C). The Test line (T) should be absent.

An invalid result indicates that the test was not performed correctly or that the test kit may be defective. This is indicated by the absence of the Control line (C)‚ regardless of the presence or absence of the Test line (T).

If you obtain an invalid result‚ it’s important to repeat the test with a new InteliSwab kit‚ following the instructions carefully. Consulting the included instructions or contacting OraSure Technologies for assistance is recommended for any uncertainties regarding result interpretation.

Positive Result

A positive result on the InteliSwab COVID-19 Rapid Test indicates the presence of SARS-CoV-2 antigens in your sample‚ suggesting that you may have a current infection. This is indicated by the appearance of both the Control line (C) and the Test line (T) in the results window.

It’s important to note that even a faint visible colored Test line (T) with the Control line (C) is considered a positive result. This means that even a weak signal of the virus’s presence is still considered a positive finding.

If you receive a positive result‚ it is crucial to take appropriate measures to prevent the spread of the virus. These measures may include⁚

• Isolating yourself from others to reduce the risk of transmission.
• Contacting your healthcare provider for guidance on further testing‚ treatment‚ and management of your infection.
• Following the recommendations provided by public health authorities regarding quarantine and isolation periods.

Remember that a positive result on a rapid test should be confirmed by a more sensitive PCR test‚ especially for important decisions related to medical care or public health measures.

Negative Result

A negative result on the InteliSwab COVID-19 Rapid Test indicates that the test did not detect SARS-CoV-2 antigens in your sample. This is indicated by the appearance of only the Control line (C) in the results window. The absence of the Test line (T) suggests that the virus is not present in detectable levels at the time of the test.

It’s important to remember that a negative result does not guarantee that you are not infected with COVID-19. The test may not detect the virus if you are in the early stages of infection or if the viral load is low.

If you have symptoms of COVID-19‚ even if you get a negative result‚ it’s still important to contact your healthcare provider for guidance. They may recommend further testing‚ such as a PCR test‚ or provide advice on managing your symptoms.

Additionally‚ continue to practice good hygiene measures‚ such as frequent handwashing‚ wearing a mask in public settings‚ and maintaining physical distancing. These practices help prevent the spread of the virus‚ even if you test negative.

Invalid Result

An invalid result on the InteliSwab COVID-19 Rapid Test indicates that the test was not performed correctly or that there was an issue with the test kit itself. This is indicated by the absence of the Control line (C) in the results window‚ regardless of the presence or absence of the Test line (T).

An invalid result may occur if the swab was not stirred at least 10 times in the solution‚ if any of the solution in the Developer Vial spilled‚ or if the test was not performed within the specified time frame.

If you receive an invalid result‚ repeat the test with a new test kit. Ensure that you follow the instructions carefully‚ particularly regarding the swabbing procedure and the addition of the solution.

If you continue to experience invalid results‚ it’s advisable to contact OraSure Technologies at 1-833-601-0127 or visit www.InteliSwab.com for further assistance. They can provide guidance on troubleshooting the test or recommend alternative testing options.

Keep in mind that invalid results can occur due to various factors‚ and it’s important to address them to ensure accurate and reliable test results.

Post-Test Instructions

After completing the InteliSwab COVID-19 Rapid Test‚ it’s crucial to dispose of the test kit properly to prevent the spread of infection and ensure safety. The test components should be treated as potentially infectious materials‚ and proper disposal procedures must be followed.

The InteliSwab test kit‚ including the swab‚ developer vial‚ and test cassette‚ should be placed in a sealed plastic bag and disposed of in accordance with local regulations for biohazardous waste.

Wash your hands thoroughly with soap and water for at least 20 seconds after handling the test kit. This helps to prevent the spread of any potential contamination.

Remember that the InteliSwab COVID-19 Rapid Test is a qualitative test‚ meaning it only indicates whether SARS-CoV-2 antigen is present or not. A positive result requires further evaluation by a healthcare professional.

If you have any questions or concerns about the test results or post-test procedures‚ consult your healthcare provider or contact OraSure Technologies at 1-833-601-0127 or visit www.InteliSwab.com for further assistance.

Important Notes

The InteliSwab COVID-19 Rapid Test is intended for self-use and should be performed only by individuals who have been trained and understand the instructions. The test is not a substitute for professional medical advice or diagnosis.

Always follow the instructions provided in the test kit carefully. The test results are only valid if the instructions are strictly adhered to. Any deviation from the instructions may affect the accuracy of the test results.

A negative result does not necessarily mean that you are not infected with COVID-19. If you have symptoms of COVID-19 or have been in close contact with someone who has tested positive‚ consult your healthcare provider for further evaluation.

The InteliSwab COVID-19 Rapid Test should not be used to diagnose other conditions. If you have any concerns about your health‚ it’s always best to consult a healthcare professional.

The InteliSwab COVID-19 Rapid Test is for single use only. Do not reuse any components of the test kit.

Contact Information

For any questions or concerns regarding the InteliSwab COVID-19 Rapid Test‚ you can contact OraSure Technologies through the following channels⁚

• Phone⁚ 1-833-601-0127
• Website⁚ www.InteliSwab.com

The OraSure Technologies team is available to assist you with any inquiries related to the test‚ including⁚

• Interpretation of test results
• Technical assistance with the test procedure
• Information on the availability of the test
• Reporting of adverse events

You can also reach out to them for any other concerns or questions you may have about the InteliSwab COVID-19 Rapid Test. They are committed to providing prompt and helpful support.